GTAC Services Offered

Confined Spaces

These courses feature hands-on training with explosion meters, oxygen meters and other test equipment needed in order to make a safe entry. The training will be accomplished through lecture, manipulative skill demonstration/performance and scenario participation.

These courses meet Federal OSHA requirements under
Title 8 CCR, Section 5156(k), 5157(k), 5158(k) and
29 CFR 1910.146(k) NFPA 1670 (Technical Rescue)

Confined Space Awarness

1 day Course

Confined Space Entry Operations

1 day Course

Confined Space Entry Supervisor

2 day Course

Confined Space Rescue

3 day/24hr Course – Fixed Facilities
5 day/40hr Course – All Risk

The confined space rescue course is designed to meet the rescue requirements of 29 CFR 1910.146(k) & NFPA 1670 (Technical Rescue). Following successful completion, the student will have the skill and knowledge to perform Confined Space Rescue and assist emergency responders. The training will be accomplished through lecture, manipulative skill demonstration/performance and scenario participation.

HAZWOPER Training is Crucial in Keeping Companies Compliant and Safe

Hazardous Waste Operations and Emergency Response (HAZWOPER) is a blanket term that refers to government-mandated hazardous waste operations that are conducted in the US under OSHA Standard 29 CFR 1910.120 and Cal OSHA Standard Title 8 CCR 5192. Among currently existing OSHA standards, HAZWOPER is one of the most sensitive and highly ranked in terms of importance. So for any company that deals with these operations on a regular basis, the proper HAZWOPER training is paramount to achieving OSHA compliance.

To assist companies in becoming compliant with this OSHA standard, with the least amount of financial and operational expenditures, Global Training and Compliance, Inc. offers FRA, FRO, 24, and 40 hour HAZWOPER training courses designed to teach as much as possible regarding the hazardous waste operations that make up HAZWOPER. Training topics include clean-up operations required by federal, state, or local governmental bodies, operations involving hazardous waste conducted at treatment, storage, and disposal (TSD) facilities, and emergency response operations for substantial threats posed by hazardous substances.

Our HAZWOPER training courses can be arranged as on-site, hands-on training or held at our location. We pride ourselves in specializing in several forms of environmental, health, and safety training in order to ensure that clients receive only the best and most current courses available throughout the industry.

There are definite benefits to customizing HAZWOPER training and other OSHA-required training courses. We invite companies to contact us to discuss specialized training courses and options tailored to suit their needs. With Global Training and Compliance it’s certainly not a problem.

Hazardous Materials First Responder Operations

2-day/16-hr. course View Course Details

Hazardous Materials, First Responder Operations Decontaminations

1-day/8-hr. course View Course Details

Hazardous Materials Technician for Industry

5-day/40-hr. course View Course Details

Hazardous Materials General Site Worker

(40-Hour HAZWOPER)
5-day/40-hr. course View Course Details

Fire Extinguisher Training

The training system we utilize is state of the art which provides the same firefighting experience as conventional methods, but in a “Greener” and “Safer” manner. The fire extinguisher system senses where the student aims and sweeps the compressed air and water Smart Extinguisher and varies the flames automatically. The SmartProp provides a realistic flame pattern, but also requires that students use the proper technique for the flame to extinguish.

With the SmartProp Technology, we utilize propane and water and generate “NO” hazardous waste from the use of standard dry chemical powder with saturated hydrocarbons. This provides for a more environmentally friendly way to provide the same fire intensity with little to no impact on the environment.

All training complies with the provisions of the California Code of Regulations Title 8 Section 6151(g)(1)-(4), Title 29 Code of Federal Regulations 1910.158(g)(1)-(4) and AQMD requirements.

Fall Protection and Prevention Courses

With the collaboration of Miller Fall Protection, Global Training & Compliance, Inc. offers:

Wind Energy Training Program – View Course Details

Awareness I Training – View Course Details

Competent Person Training – View Course Details

Competent Inspectors Training – View Course Details

Competent Tower Climbers TrainingView Course Details

Through a series of presentations, demonstrations and hands on training, you will gain the knowledge and skills necessary to identify and avoid hazards associated with elevated work positions. These courses are designed for employees with constant exposure with fall hazards. Training provides experience, methodology and an in-depth look at all standards (ANSI & CSA) and regulations (OSHA) covering inspection of personal fall arrest systems.

Facility and site supervisors who must serve as the “competent person” fall under the OSHA standards 1926.32(f), 1926.500, 1926.501, 1926.502, 1926.503 and 1910 General Industrial Safety Orders.

First Aid & CPR Courses

An Independent ASHI Authorized Training Center
American Safety and Health Institue Logo
Our programs provide the basic knowledge and necessary skills for a person/employee to respond effectively in an emergency. Our programs will teach each person/employee how to recognize the signs and symptoms of injuries and sudden illness.Properly applied first aid or basic life support can save lives, reduce recovery time and quite possible mean the difference between temporary disability or lifelong disability for the victim.

CPR, AED, and Basic First Aid Combination – View Course Details

Basic First Aid View Course Details

Bloodborne Pathogens – View Course Details

Emergency Medical Response For Adults in the Workplace – View Course Details

CPR PRO for the Professional Rescuer – View Course Details

First Responder – View Course Details

Lockout/Tagout Training

Approximately 3 million workers in the United States on a daily basis, face extreme risk from uncontrolled energy when servicing machinery. Serious injury or death can be the result. Typical non-lethal injuries include fractures, lacerations, contusions, amputations, puncture wounds, electrical shock, and falls The average lost time for injuries runs approximately 24 days. The Occupational Safety and Health Administration (OSHA) estimates that approximately 120 fatalities and approximately 28,000 serious and 32,000 minor injuries each could be prevented if proper lockout/tagout procedures at job sites are initiated. This Lockout/Tagout Training Program ensures that the hazards of uncontrolled energy are evaluated, safety procedures implemented and that the proper hazard information is transmitted to all affected workers. It is easy to edit with your company specific information.
These courses meet Federal OSHA requirements under 29 CFR 1910.147.


OSHA General Industry Courses

OSHA 30-Hour General Industry Training – View Course Details

OSHA 10-Hour General Industry TrainingView Course Details


OSHA Construction Courses

OSHA 10-Hour Construction TrainingView Course Details

OSHA 10-Hour Construction Training combined with Fall Protection Competent Person TrainingView Course Details

OSHA 30-Hour Construction TrainingView Course Details

We Do Everything - from Infrastructure to Water Waste Treatment